Casio 3568 - Page 31

Timer
The timer counts down from a start time
specified by you. The watch performs a sound
and/or vibration operation when the end of the
countdown is reached.
●
The sound and/or vibration alert operations
will not be performed while battery power is
low.
Using the G-SHOCK MOVE
Phone App to Configure
Timer Settings
If the watch is paired with a phone, you can
also use the G-SHOCK MOVE phone app to
set the timer start time.
l
Configuring Watch Settings
Setting a Start Time
The start time can be set in 1-second units up
to 60 minutes.
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the number of timer repeats
(1 to 20) setting screen.
Number of repeats
3. Use (A) and (C) to specify the number of
timer repeats (Auto Repeat).
4. Press (B).
5. Use (A) and (C) to specify the position of
the timer in the sequence.
Timer sequence
6. Press (B).
This causes a cursor to appear under the
minutes setting.
7. Use (A) and (C) to change the minutes
setting.
Minutes
8. Press (B).
This moves the cursor to the seconds
setting.
9. Use (A) and (C) to change the seconds
setting.
Seconds
10. Press (B).
11. Use (A) and (C) to select whether or not
you want to save your current settings.
[YES] Saves current settings.
[NO] Discards current settings.
[RETURN]
Returns to the number of
repeats setting.
12. Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Timer Mode
screen will re-appear.
Note
●
To exit the timer setting operation at
any point, press (D) and advance to
step 11.
●
The watch exits the setting operation
automatically after about two or three
minutes of non-operation.
Watch Operation Guide 3568
31