Mode Overview
●
Calendar Mode
The main hour, minute, and second hands
indicate the current time.
The small hour and minute hands indicate the
current World Time.
30
③
②①
④⑤
⑥
Last Time
Adjustment Result
A Current location time (24-hour time)
One revolution every 24 hours.
B Day of the week at current location
C World Time minute
D World Time hour
E World Time hour (24-hour time)
The hand points to the A-side for a.m.
times, and to the P-side for p.m. times.
F Current location date
Time Adjustment Using a Time Calibration
Signal
Hold down (B) for at least 0.5 seconds until the
second hand points to [RC].
●
A manual time calibration signal receive
operation cannot be performed while the
watch is paired with a phone.
Swapping the Current Location Time and
World Time
Hold down (A) for at least three seconds.
Connecting with a Paired Phone to Adjust
the Watch’s Time
Hold down (B) for at least 0.5 seconds until the
second hand points to [C].
Searching for a Paired Phone
Hold down (B) for at least five seconds.
●
Dive Mode
In this mode, the hour, minute, second and 24-
hour hands indicate the elapsed dive time and
surface interval time.
Dive time
●
To stop dive time measurement, hold down
(B) for at least two seconds.
●
Stopping dive time measurement starts
surface interval measurement.
30
30
③
②①
Measurement In
Progress
Measurement Start
Dive Time Measurement Start
A Dive time hours
This hand performs one revolution, which
indicates two hours of dive time.
Starting from 12 o’clock, this hand points
to 6 o’clock after one hour of dive time and
12 o’clock after two hours.
B Dive time minutes
The hour and minute hands move
together.
C Dive time seconds
Surface interval
●
To stop surface interval measurement,
press (B).
●
Stopping surface interval measurement
starts dive time measurement.
A Surface interval hours (24-hour time)
This hand performs one revolution, which
indicates 24 hours of surface interval time.
Starting from 12 o’clock, this hand points
to 6 o’clock after 12 hours of surface
interval time and 12 o’clock after 24 hours.
B Surface interval hours
C Surface interval minutes
D Surface interval seconds
●
Tide Graph Mode
The small hour and minute hands indicate the
current time in the port you have specified.
●
The main hour, minute, and second hands
indicate the current time.
A Tide Level
B Current time in selected port
●
Stopwatch Mode
The second hand, and the small hour and
minute hands indicate the elapsed stopwatch
time.
●
The main hour and minute hands indicate
the current time.
A Stopwatch seconds
B Stopwatch hours
C Stopwatch minutes
D Stopwatch hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
Operation Guide 5624
3