Casio 5624 User Manual

●
Power Saving
If the watch is not moved for about one hour,
the connection with your phone will be
terminated and the watch will enter Level 1
power saving.
Also, leaving the watch in a dark location for
about one hour between the hours of 9 p.m.
and 6 a.m. will cause the second hand to stop,
and the watch will enter Level 2 power saving.
If the watch is left in this condition for six or
seven days, all hands will stop and the watch
will enter Level 3 power saving.
Level 1 :
Except for communication with a phone,
watch functions are operational.
Level 2 :
Basic timekeeping functions are operational.
Level 3 :
Only the day indicator is operational.
Note
●
Note that the watch also may enter the
power saving state if its face is blocked
from light by your sleeve while you are
wearing it.
●
The watch will enter power saving
when it is in one of the modes below.
ー
Calendar Mode
ー
Tide Graph Mode
ー
Stopwatch Mode (reset to all zeros)
●
Recovering from Power Saving
Operation
●
Use one of the operations below to exit
power saving.
ー
Press any button.
ー
Perform some crown operation.
ー
Angle the watch towards your face.
●
To go from Level 2 or Level 3 power saving
to Level 1 power saving, place the watch in
a brightly lit location.
Viewing the Face in the Dark
The watch has an LED light that you can use
to illuminate the display for about three
seconds for viewing in the dark. When turned
on, illumination becomes gradually brighter
and then gradually dimmer.
●
Turning On Illumination
Press (A) to illuminate the face of the watch.
30
●
Face illumination is disabled in the
Stopwatch Mode.
●
Illumination is disabled while the hands are
moving at high speed.
●
The light may flicker when it turns on or off.
Useful Features
Pairing the watch with your phone makes a
number of the watch’s features easier to use.
Auto time adjustment
l
Auto Time Adjustment
12:30
Diving Log data transfer to your phone
l
Viewing and Using Diving Log Data
Viewing of the tide level at a port you
specify with OCEANUS Connected
l
Specifying a Port
Selection of More Than 300 World Time
cities
l
Configuring World Time Settings
In addition, a number of other watch settings
can be configured using your phone.
To transfer data to a watch and to
configure settings, you first need to pair
the watch with your phone.
l
Getting Ready
●
Your phone needs to have the CASIO
“OCEANUS Connected” app installed to
pair with the watch.
Time Adjustment
Your watch can obtain date and time
information by connecting with a phone and by
receiving time signals, which it uses to adjust
its settings.
Important!
●
When you are on an aircraft or in any
other location where radio signals may
cause problems, enable the watch’s
Airplane Mode to disable connection
with your phone.
l
Using the Watch in a Medical
Facility or Aircraft
Operation Guide 5624
6

Casio 5624 Specifications

General

Brand	Casio
Model	5624
Category	Watch
Language	English