Unpairing
Unpairing the watch from a phone requires
both CASIO WATCHES and watch
operations.
●
Deleting Pairing Information from the
CASIO WATCHES phone app
1.
X
If the watch is connected with a phone,
press (A) to terminate the connection.
30 30
Connected Disconnected
2.
Y
Tap the “CASIO WATCHES” icon.
3.
Y
Perform the operation shown on the
phone screen to unpair.
●
Deleting Pairing Information from the
Watch
1.
X
Pull out the crown to the first click.
2.
X
Hold down (A) for at least 10 seconds.
This deletes the pairing information. The
second hand will point to [C].
3.
X
Push the crown back in.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
Deleting Pairing Information from the
Watch
l
C
Pair the watch with a phone.
Time Correction
Your watch can obtain date and time
information by connecting with a phone and by
receiving time signals, which it uses to adjust
its settings.
Important!
●
Disable auto time correction whenever
you are inside an aircraft or in any other
area where radio wave reception is
prohibited or restricted.
l
Using CASIO WATCHES to
Configure Settings
l
Using Watch Operations to
Configure Settings
Referring to the information below, configure
the time setting in accordance with the method
that suits your own lifestyle.
Do you use a phone?
Time correction by connecting with your
phone is recommended.
l
Auto Time Correction
Can you receive a time signal in your area?
If you are able to receive a time signal,
time settings can be adjusted in
accordance with a received signal.
l
Time Calibration Signal Reception
Ranges
l
Setting a Home City
Other than the above.
If you are unable to connect with a phone
and are unable to receive a time signal,
you can perform watch button operations
to adjust its time setting.
l
Using Watch Operations to Adjust the
Time Setting
Watch Operation Guide 5728
12
To Next Page
Loading...
