Useful Features
Pairing the watch with your phone makes a
number of the watch’s features easier to use.
Auto time correction
l
Auto Time Correction
Selection of More Than 300 World Time
cities
l
Configuring World Time Settings
Recording of Anniversaries and
Appointments
l
Configuring Reminder Settings
In addition, a number of other watch settings
can be configured using your phone.
To transfer data to a watch and to
configure settings, you first need to pair
the watch with your phone.
l
Getting Ready
●
Your phone needs to have the “CASIO
WATCHES” phone app installed to pair with
the watch.
Linking with a Phone
While there is a Bluetooth connection
between the watch and phone (Mobile Link),
the watch’s current time setting is corrected
automatically. You can also change the
watch’s other settings.
Note
●
This function is available only while the
CASIO WATCHES phone app is
running on the phone.
●
This section describes watch and
phone operations.
X
: Watch operation
Y
: Phone operation
Getting Ready
To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
●
A
Install the app on your phone.
In Google Play or the App Store, search for the
“CASIO WATCHES” phone app and install it
on your phone.
●
B
Configure Bluetooth settings.
Enable the phone’s Bluetooth.
Note
●
For details about setting procedures,
see your phone documentation.
●
C
Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1. Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y
Tap the “CASIO WATCHES” icon.
3.
Y
Tap the of the “My Watch” tab.
4.
Y
Perform the operation shown on the
phone screen to register the watch to the
CASIO WATCHES phone app.
5.
X
Hold down (C) for at least three seconds
until [CNCT] starts to flash. Release the
button when the mode hand moves to
e
.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing.
●
If pairing fails for some reason, [ERR]
will appear on the display momentarily
and then the watch will return to the
Timekeeping Mode. Perform the pairing
procedure again from the beginning.
Pairing complete.Pairing started.
Note
●
The first time you start up the CASIO
WATCHES phone app, a message will
appear on your phone asking if you
want to enable location information
acquisition. Configure settings to allow
background use of location
information.
Watch Operation Guide 5729
10
To Next Page
Loading...
