Casio 5729 - Reminder; Creating a Reminder; Checking Reminder Details; Hand Alignment Correction

Reminder
After you create a reminder for an
appointment, anniversary, or some other
event you don’t want to forget, the watch will
remind you when that day arrives.
Creating a Reminder
Use CASIO WATCHES to create reminders.
●
To use CASIO WATCHES, you first need to
pair your watch with a phone.
l
Getting Ready
●
If the watch is already paired with a phone,
use CASIO WATCHES to create reminders.
l
Configuring Reminder Settings
Checking Reminder Details
●
Checking reminders from tomorrow
onwards
The [REM] indicator appears on the display if
you use CASIO WATCHES to create a
reminder that is after today’s date. Pressing
(A) will switch the Timekeeping Mode screen
to the REM display, which will show reminder
item dates or days of the week, followed by
their titles.
●
Checking today’s reminders
[REM] flashes on the display during a day is
when there is an anniversary or event that was
created with CASIO WATCHES. Pressing (A)
will switch the Timekeeping Mode screen to
the REM display, which will show the titles of
today’s reminder items.
Hand Alignment
Correction
Strong magnetism or impact can cause the
time indicated by the analog hands to become
different from the time on the digital display. If
this happens, adjust hand alignment.
Using CASIO WATCHES to
Adjust Hand Alignment
If the watch is paired with a phone, you can
also use CASIO WATCHES to adjust hand
alignment.
l
Adjusting Hand Alignment
Adjusting Hand Alignment
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least five seconds.
Release the button when [SUB] starts to
flash.
This enables adjustment of mode hand
alignment.
Mode hand
After five secondsAfter 3.5 seconds
3. If the mode hand is not aligned with 3
o’clock, use (B) and (D) to align it.
4. Press (C).
This enables adjustment of the hour and
minute hands.
Minute handHour hand
5. If the hour and minute hands are not at 12
o’clock, use (B) and (D) to align them.
6. Press (A) to exit the setting screen.
Note
●
During hand alignment adjustment, the
watch automatically returns to the
Timekeeping Mode after two or three
minutes of non-operation.
Watch Operation Guide 5729
23