Casio 5735 - Stopwatch; Starting Time Measurement Directly from the Timekeeping Mode; Measuring Elapsed Time; Measuring a Split Time

Stopwatch
The stopwatch measures elapsed time in units
of 1/100 second up to 23 hours, 59 minutes,
59.99 seconds (24 hours). When the
maximum timing limit is reached, elapsed time
returns to 0 and timing continues from there.
Starting Time Measurement
Directly from the
Timekeeping Mode
If the stopwatch is reset to all zeros,
performing the operation below in the
Timekeeping Mode immediately starts a
stopwatch elapsed time measurement
operation.
1. In the Timekeeping Mode, press (D).
This enters the Stopwatch Mode.
What happens when you perform the
above step depends on the current status
of the stopwatch timing operation as
described below.
l
Measuring Elapsed Time
●
When the stopwatch is reset to all zeros
A new elapsed time measurement
operation will start. (One Press Start
from the Timekeeping Mode)
●
When a previous measurement
operation is paused
The measurement operation remains
paused and does not restart.
●
When an ongoing measurement is in
progress*
The measurement operation will
continue.
* An ongoing elapsed time operation
continues even if you switch from the
Stopwatch Mode to another mode.
Measuring Elapsed Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
Stop
Resume
Stop
Start
Hours
Minutes Seconds
1/100 seconds
Minutes
3. Press (B) to reset the stopwatch to all
zeros.
Measuring a Split Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
●
Pressing (B) displays the elapsed time
from the start of a race up to the point
when you pressed the button (split
time).
D
B
B
D
Stop
Split release
Split
Start
Hours
Minutes Seconds
1/100 seconds
Minutes
3. Press (B) to reset the stopwatch to all
zeros.
Watch Operation Guide 5735
13