12
Chapter 1: Getting Ready
• Never try to modify the power cord of the AC adaptor, do not allow it to
become broken or cracked, and do not subject it to excessive bending,
twisting, or pulling. Do not place heavy objects on top of the power cord
and do not subject it to direct heat. Any of the above creates the danger of
fire and electrical shock.
• Never touch the AC adaptor while your hands are wet. Doing so creates
the danger of electrical shock.
Important!
• Never pull on the power cord when unplugging the AC adaptor from a wall
outlet. Doing so creates the danger of damage to the cord, fire, and elec-
trical shock. When unplugging the AC adaptor, be sure to grasp the body
of the adaptor.
• Be sure to unplug the AC adaptor from the wall outlet whenever leaving it
unattended for long periods.
• Be sure to use only a genuine optional AD-A60024 AC adaptor. Use of
another type of adaptor can result in damage to the adaptor, the data
analyzer, or some other unforeseen serious problem. Use of an unau-
thorized AC adaptor also voids your warranty.
• Remove the batteries from the data analyzer whenever you plan to oper-
ate under AC adaptor power for long periods.
• Be sure to turn the data analyzer off before connecting the AC adaptor.
• The body of the AC adaptor becomes warm to the touch when used for
long periods. This is normal and does not indicate malfunction.
To connect the AC adaptor to the data analyzer
1. Press [ON/OFF] to turn power off.
2. Connect the AC adaptor’s plug into the AC adaptor terminal on the bottom
of the data analyzer.
3. Plug the other end of the AC adaptor’s power cord directly into a wall
outlet.
4. Press [ON/OFF] to turn on power.
To Next Page
Loading...
Need help?
General
