Name: Casio CT-S300
Brand: Casio
Rating: 4 (1 reviews)

To Next Page

To Previous Page

8.16 Portamento Control(54H)

Message Format: BnH 54H vvH

n: MIDI Channel Number

vv: Source Key Number

Receive Receipt of this message ﬁrst stores the Source Note Number for the next note. When the next

Note On is received, the portamento eﬀect is applied to the note using this Source Note Number as the

pitch start p oint and the Note On event key number as the end point. If there already is a note being

sounded by Source Note Number at this time, the new note on is not performed and the portamento

eﬀect is applied to the pitch of the note being sounded. That is to say that legato play is performed.

8.17 Reverb Send Level (5BH)

Message Format: BnH 5BH vvH

n: MIDI Channel Number

vv: Value

Receive Receipt changes the reverb send of the corresponding part.

8.18 RPN (Registered Parameter Number) LSB/MSB (64H,65H)

Message Format: BnH 64H llH (LSB)

BnH 65H mmH (MSB)

n: MIDI Channel Number

ll: LSB Value

mm: MSB Value

8.18.1 Pitch Bend Sensitivity

Message Format: BnH 64H 00H

BnH 65H 00H

BnH 06H mmH

BnH 26H llH

n: MIDI Channel Number

mm: MSB Value(00H - 0CH)

ll: LSB Value(Send:00H, Receive:Ignored)

Transmit Sent when Pitch Bend Range is changed. (CT-S300)

Receive Receipt changes Bend Range of the corresponding part.

Questions and Answers:

Need help?

Do you have a question about the Casio CT-S300 and is the answer not in the manual?

Casio CT-S300 Specifications

General