Receive Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modulation
depth. The modulation effect differs according to the tone being used.
10 Pitch Bend Change
Message Format: EnH llH mmH
n: MIDI Channel Number
ll: Value LSB
mm: Value MSB
Transmit Sent when the pitch bend wheel is operated. (CT-S400/CT-S410)
Receive Receipt changes the pitch of the currently sounding note. The range of the pitch change
depends on the bend range value setting.
16
To Next Page
Loading...
