Timbre Type Specific Operation This operation differs in accordance with the Timbre Type (see
“About the Timbre Type” in “8 Program Change”) setting.
• Timbre Type: Melody,Hex Layer
Sustain off/on control is performed in accordance with the value of the received message. For
information about the relationship between setting values and send/receive values, see the “14.2
Off/On Setting Value Table” in “IV Setting Values and Send/Receive Values”.
• Timbre Type: Piano
Continuous control of the following is performed in accordance with the value of the received
message.
– Piano note decay rate
For information about the relationship between setting values and send/receive values, see “14.3
Sustain Pedal Setting Value Table” in “IV Setting Values and Send/Receive Values.”
• Timbre Type: LM (Linear Morphing) Piano
Continuous control of the following is performed in accordance with the value of the received
message.
– Piano note decay rate
– Resonance characteristics and decay rate of Damp er Resonance effect resonance note
see “14.3 Sustain Pedal Setting Value Table” in “IV Setting Values and Send/Receive Values.”
• Timbre Type: Drum The received message does not affect sound source operation.
7.9 Portamento On/Off (41H)
Message Format: BnH 41H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “14.2 Off/On Setting
Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when the portament on/off is changed.
Receive Receipt changes the portamento on/off setting.
7.10 Sostenuto (42H)
Message Format: BnH 42H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “14.2 Off/On Setting
Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when a pedal that has a sostenuto function is operated.
10
To Next Page
Loading...
Need help?
General
