Receive Receipt p erforms an operation equivalent to a sostenuto pedal operation.
7.11 Soft Pedal (43H)
Message Format: BnH 43H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “14.2 Off/On Setting
Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when a pedal that has a soft pedal function is operated.
Receive Receipt p erforms an operation equivalent to a soft pedal operation.
7.12 Filter Resonance (47H)
Message Format: BnH 47H vvH
n: MIDI Channel Number
vv: Value
Transmit Sent when the knob is operated by setting.
Receive Receipt changes the filter resonance intensity.
7.13 Release Time (48H)
Message Format: BnH 48H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “14.4 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit It will be changed when sustain is used and when setting is changed. Sent when the knob
is operated by setting.
Receive Receipt makes a relative change in the time it takes for a note to decay to zero after a key is
released.
7.14 Attack Time (49H)
Message Format: BnH 49H vvH
n: MIDI Channel Number
vv: Value (Note1)
11
To Next Page
Loading...
Need help?
General
