13.3 CASIO General System Exclusive
Message Format: F0H 44H 7EH 7FH iiH ccH ssH ggH ppH ddH ... F7H
ii: Device ID (7FH)
cc: Category ID
ss: Sub Category ID
gg: Group ID (00H)
pp: Parameter ID
dd ...: Data
This message can be used to p erform sound source parameter operations.
13.3.1 Reverb Type
Message Format: F0H 44H 7EH 7FH 7FH 04H 00H 00H 00H ccH ttH F7H
cc: Channel(Note1)
tt: Type(Note2)
Note1: For information about the relationship between setting values and send/receive values, see “MIDI Receive Ch” in
“1.3.2 Instrument Part Block” of this document.
Note2: For information about the relationship between setting values and send/receive values, see “14.9 Reverb Type (CASIO
General System Exclusive) Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when the reverb type is changed.
Receive Receipt changes the reverb type.
13.3.2 Chorus Type
Message Format: F0H 44H 7EH 7FH 7FH 04H 01H 00H 00H ccH ttH F7H
cc: Channel(Note1)
tt: Type(Note2)
Note1: For information about the relationship between setting values and send/receive values, see “MIDI Receive Ch” in
“1.3.2 Instrument Part Block” of this document.
Note2: For information about the relationship between setting values and send/receive values, see “14.10 Chorus Type (CASIO
General System Exclusive) Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when the chorus type is changed.
Receive Receipt changes the chorus type.
21
To Next Page
Loading...
