Casio CT-X800 - Reverb and Chorus Effects

EN-15
Controlling the Keyboard Sounds
1. Press cs FUNCTION and then use the ct [2]
(o) and [3] (p) keys to display “Reverb”
(page EN-6).
2. Use the dk [–] and [+] keys to select the reverb
setting you want.
Chorus is a function that adds depth and breadth to notes.
1. Press cs FUNCTION and then use the ct [2]
(o) and [3] (p) keys to display “Chorus”
(page EN-6).
2. Use the dk [–] and [+] keys to select the chorus
type you want.
You can select from among chorus types 1 through 11.
• If you select Setting Number 1 (Tone), appropriate
chorus settings are assigned to each tone.
• The actual effect produced by chorus depends on the tone
you are using.
Using Reverb
Setting Number Parameter
1 Off
2 - 6 Room1 - 5
7 - 8 Large Room1 - 2
9 - 13 Hall1 - 5
14 - 15 Stadium1 - 2
16 - 17 Plate1 - 2
18 - 19 Delay1 - 2
20 Church
21 Cathedral
R e v e r b
Using Chorus
Setting Number Parameter
1 Tone
2 - 7 Chorus1 - 6
8 - 11 Flanger1 - 4
C h o r u s
Indicator is not displayed when “Tone” is selected.
CTX800-ES-1A.indd 17 2017/11/28 10:19:08