No Operation Display Inspection contents
1
2
3
4
— 49 —
4-7. Wireless LAN Country Setting (DT-X5M10R only)
Perform the Wireless LAN Country Setting after replacing the following;
• Main PCB assy
■ Setting the Country Code
Display "Test Menu #3".
Select "2.WLAN Country
Code".
Confirm the display on the left.
Input following keys according
to the country to be set.
Japan 씮 1
Europe 씮 2
America 씮 3
Push "CLR" key.
Push "ENT" key.
Back to Main Menu.
Confirm the display on the left.
The “Status” box is displayed.
Confirm whether the country code
has bee set correctly.
Japan :04
Europe :02
America :01
Test Menu V0.22F #3
1.Burn-In Test
2.WLAN Country Code
3.Serial ID Set
4.RTC
5.OBR Set
6.Memory Test
7.Previous Page
8.Exit
WLAN Country Code
1.Japan 04
2.Europe 02
3.America 01
4.Country Code Check
WLAN Country Code
1.Japan 04
2.Europe 02
3.America 01
4.Country Code Check
Status OK X
Program OK.
Country Code: 04
WLAN Country Code
1.Japan 04
2.Europe 02
3.America 01
4.Country Code Check
To Next Page
Loading...
Need help?
General