Casio EX-Z3 - 3 - Formatting Built-In Memory

OTHER SETTINGS
117
Formatting Built-in Memory
Formatting built-in memory deletes any data stored in it.
IMPORTANT!
• Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
• Formatting built-in memory deletes all files, including
files in the FAVORITE folder (page 104), protected
files (page 97), and Best Shot user setups (page 66).
• The startup screen image is not deleted by
formatting memory.
1. Check to make sure there is no memory card
loaded in the camera.
• If there is a memory card loaded in the camera,
remove it (page 119).
2. In the REC mode or the PLAY mode, press
[MENU].
3. Select the “Set Up” tab, select “Format”, and
then press [왘].
4. Select “Format”, and then press [SET].
• To exit the format operation without formatting,
select “Cancel”.