55
Snapshot Tutorial
Use the following procedure to specify the operation that the [AEL] button performs.
1. In the REC mode, press [MENU].
2. Use [4] and [6] to select the “REC” tab.
3. Use [8] and [2] to select “AE/AF Lock” and then press [6].
4. Use [8] and [2] to change the setting, and then press [SET] to apply it.
NOTE
• AE Lock and AF Lock are not supported while “
O
Tracking” is selected for the “AF
Area” setting.
• Performing an EV shift operation while AE Lock is in effect will cause Auto
Exposure to be unlocked.
• Performing a zoom operation while AF Lock and AE Lock are in effect will cause
both of them to become unlocked.
• AE Lock and AF Lock are not supported during movie recording.
Locking the Auto Exposure and Auto Focus Setting
Pressing [AEL] temporarily locks the current exposure and/or
focus settings. Press [AEL] again to unlock the settings.
• Pressing [AEL] while the shutter button is half-pressed will
lock the current exposure or focus setting.
Specifying the [AEL] button Operation
AE Lock Exposure lock
AF Lock Focus lock
AE/AF Lock Exposure and focus lock
[AEL]
To Next Page
Loading...
Need help?
General
