50
Snapshot Tutorial
9. Use [8] and [2] to select the sixth control panel
option from the top (Max CS shots).
10.
Use [4] and [6] to select the maximum number of shots for each
continuous shutter operation and then press [SET].
11.
Use [8] and [2] to select the seventh control panel option from the top
(Prerecord CS shots).
12.
Use [4] and [6] to specify how many of the 30 images and for how
long images should be pre-recorded in the buffer.
• Prerecord CS shooting is not performed when the number of buffer images and
the recording time are both zero.
13.
Press [SET].
• The approximate
number of recordable
CS images will appear
on the monitor screen.
Number of pre-record
images and pre-record
time (Not displayed
when “AUTO” is selected
for “High-speed CS fps”.)
Number of remaining images and
remaining recording time after the
shutter button full-press (Not
displayed when “AUTO” is
selected for “High-speed CS fps”.)
Shutter button full-press
Remaining snapshot memory capacity
Number of recordable CS images (If you are
not performing Prerecord CS, the allowable
continuous shutter time also is displayed.)
To Next Page
Loading...
Need help?
General
