73
Using BEST SHOT
7. Use [4] and [6] to select the continuous
shutter (CS) speed you want and then press
[SET].
* fps (frames per second) is a unit of measurement indicating the number of
images recorded or played back per second.
8. Use [8] and [2] to select the sixth control panel
option from the top (Max CS shots).
9. Use [4] and [6] to select the maximum number of shots for each
continuous shutter operation and then press [SET].
10.
Use [8] and [2] to select the seventh control panel option from the top
(Prerecord CS shots).
11.
Use [4] and [6] to specify how many of the 30 images and for how
long images should be pre-recorded in the buffer.
• You cannot set a value of “0” for the number of Prerecord CS buffer images.
12.
Press [SET].
• The approximate number of recordable
CS images will appear on the monitor
screen.
AUTO
The camera measures light levels and configures the fastest
possible CS speed setting automatically.
3 to 30 fps
Enables specification of the number of CS images recorded per
second.
CS speed
Number of pre-record
images and pre-record
time (Not displayed when
“AUTO” is selected for
“High-speed CS fps”.)
Number of remaining images and
remaining recording time after the
shutter button full-press (Not
displayed when “AUTO” is
selected for “High-speed CS fps”.)
Shutter button full-press
Remaining snapshot memory
capacity
Number of recordable
CS images
To Next Page
Loading...
Need help?
General
