78
Advanced Settings
3. Use [8] and [2] to select the menu item you
want, and then press [6].
4. Use [8] and [2] to change the setting.
5. After the setting is the way you want, press
[SET].
• Pressing [4] registers the selected setting and
returns to the menu.
• To configure settings on another tab after
pressing [
4] to return to the menu, use [8] to
move the highlighting up to the tabs, and then
use [
4] and [6] to select the tab you want.
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. The following
operation is the same as the one described under “Example Menu Screen Operation”
on page 77.
Items
Example:
When “Self-timer” is
selected on the “REC” tab
Tabs
Procedure
[r] (REC) * [MENU] * REC Tab * Self-timer
Use [4] and [6] to select the “REC” tab.
Use [8] and [2] to select “Self-timer” and
then press [6].
Press
[MENU].
Press
[r] (REC).
To Next Page
Loading...
Need help?
General
