Casio Exilim EX-S10 User Manual

158
Appendix
Images cannot be
edited (with Layout
Print, resizing,
trimming, keystone
correction, color
restoration, date/
time editing,
rotation).
Note that you cannot edit the following types of snapshots.
• Snapshots created using MOTION PRINT
•Movies
• Snapshots recorded with another camera
Other
The wrong date
and time are
displayed.
The date and time setting is off. Set the correct date and time
(page 128).
The messages on
the display are in
the wrong
language.
The wrong display language is selected. Change the display
language setting (page 129).
Images cannot be
transferred over a
USB connection.
1)The USB cable may not be connected securely. Check all
connections.
2)Your computer is running Windows 98SE or 98 and does not
have the USB driver installed. Install the USB driver (page
101). You can download the USB driver from the Official
CASIO Digital Camera Website at http://www.exilim.com/
3)Your computer is running Windows 98SE or 98 and does not
have the USB driver installed correctly. Reinstall the USB
driver correctly (page 101).
4)The wrong USB communication protocol is selected. Select
the correct USB communication protocol in accordance with
the type of device you are connecting (pages 101, 110).
5)If the camera is not turned on, turn it on.
Language selection
screen appears
when the camera is
turned on.
1)You did not configure initial settings after purchasing the
camera or the battery may have been left with a dead battery.
Check the camera setup (pages 13, 129).
2)There may be a problem with the camera’s memory data. If
this is the case, perform the reset operation to initialize the
camera’s setup (page 132). After that, configure each setting.
If the language selection screen does not re-appear when you
turn the camera on, it means that the camera’s memory
management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
Problem Possible Cause and Recommended Action
C

Casio Exilim EX-S10 Specifications

General

Megapixel	10 MP
Camera type	Compact camera
Sensor type	CCD
Image sensor size	1/2.3 \
Maximum image resolution	3648 x 2736 pixels
Digital zoom	4 x
Optical zoom	3 x
Focal length range	6.3 - 18.9 mm
Digital SLR	No
Built-in flash	Yes
Power consumption (typical)	4.2 W
Focal length (35mm film equivalent)	36 - 108 mm
Auto focusing (AF) modes	continuous auto focus, multi point auto focus, spot auto focus
Light metering	Centre-weighted, Spot
ISO sensitivity	50, 100, 200, 400, 800, 1600
Light exposure modes	Auto
Internal memory	11.8 MB
Compatible memory cards	mmc, sd
Video formats supported	MOV
Maximum video resolution	848 x 480 pixels
Display diagonal	2.7 \
Display resolution (numeric)	959 pixels
I/O ports	A/V
USB version	2.0
Image editing	resizing, rotating, trimming
White balance	auto, daylight, Fluorescent, manual, Shade, Tungsten
Camera playback	movie, single image, slide show
Self-timer delay	10 s
Playback zoom (max)	8 x
Product color	Black
Number of batteries supported	1
Flash modes	auto, Flash off

Weight and Dimensions

Depth	14.9 mm
Width	94 mm
Height	54.5 mm
Weight	112.5 g