168
Other Settings (Set Up)
Procedure
[MENU] * Set Up Tab * HDMI Output
• See page 116 for details.
Procedure
[MENU] * Set Up Tab * Startup
Display the image you want to use as your startup image and then select “On”.
• The startup image does not appear when you turn on the camera by pressing [p]
(PLAY).
• You can specify a snapshot you recorded as the startup image, or you can use the
special startup image provided in the camera’s built-in memory.
• Formatting built-in memory (page 169) will delete the current startup image setting.
• You can select the first snapshot of a CS group as the startup image. If you want to
select another image within a CS group, you need to first divide up the CS group or
use the CS Frame Edit feature to make a copy of the image outside of the CS
group.
Selecting the HDMI Terminal Output Method (HDMI Output)
Configuring a Startup Image (Startup)
To Next Page
Loading...
Need help?
General
