55
Snapshot Tutorial
8. Use [8] and [2] to select the second control panel option from the
bottom (Prerecord CS shots).
9. Use [4] and [6] to specify how many of the 30 images and for how
long images should be pre-recorded in the buffer.
• Prerecord CS shooting is not performed when the number of buffer images and
the recording time are both zero. Note that the mechanical shutter is used
when shooting with High Speed CS.
10.
Press [SET].
• The approximate number of recordable CS images will appear on the monitor
screen.
Shutter button full-press
Number of pre-record
images and pre-record
time
Number of remaining images
and remaining recording time
after the shutter button full-
press
Number of recordable CS images (If you are not performing
Prerecord CS, the allowable continuous shutter time also is displayed.)
Remaining snapshot memory capacity
To Next Page
Loading...
Need help?
General
