126
Other Playback Functions (PLAY MENU)
. To protect a specific image in a CS group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “Protect” and then press [SET].
3. Use [8] and [2] to select “Select Frames”, and then press [SET].
4. Use [4] and [6] to select the image that you want to protect, and then
press [SET].
This will protect the image and display the › icon.
• To view a particular image, rotate the zoom controller.
• To unprotect a file, select an protected image and then press [SET].
5. After you are finished, press [MENU] to exit this operation.
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 162).
. To protect all the images in a CS group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
2. Use [8] and [2] to select “Protect” and then press [SET].
3. Use [8] and [2] to select “Frame all”, and then press [SET].
4. Use [8] and [2] to select “All Frames On” and then press [SET].
This will protect all the images in the group and display the › icon.
• To unprotect all of the images in the group, select “All Frames Off” in step 4
and then press [SET].
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 162).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
