Casio Exilim EX-ZR700 - Specifying the Display Language; Configuring USB Protocol Settings; Selecting the HDMI Terminal Output Method

161
Other Settings (SETTING)
Procedure
[MENU] * “¥ SETTING” Tab * Language
. Specify the display language you want.
1
Select the bottom tab “¥”.
2
Select “Language”.
3
Select the language you want.
• Camera models sold in certain geographic areas may
not support display language selection.
Procedure
[MENU] * “¥ SETTING” Tab * USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
Procedure
[MENU] * “¥ SETTING” Tab * HDMI Output
• See page 118 for details.
Specifying the Display Language (Language)
Configuring USB Protocol Settings (USB)
Mass Storage
Select this setting when connecting to a computer (pages 140,
144). With this setting, the computer sees the camera as an
external storage device. Use this setting for normal transfer of
images from the camera to a computer.
PictBridge
Select this setting when connecting to a printer that supports
PictBridge (page 131).
Selecting the HDMI Terminal Output Method (HDMI Output)
1 23