Replacing the Battery
A low battery is indicated by a dim display, even if contrast is adjusted, or
by failure of figures to appear on the display immediately after you turn on
the calculator. If this happens, replace the battery with a new one.
Important: Removing the battery will cause all of the calculator’s memory
contents to be deleted.
1. Press (OFF) to turn off the calculator.
• To ensure that you do not accidentally turn on
power while replacing the battery, slide the
hard case onto the front of the calculator.
2. On the back of the calculator, remove the screws
and the cover.
3. Remove the battery, and then load a new battery
with its plus (+) and minus (−) ends facing
correctly.
4. Replace the cover.
5. Initialize the calculator:
(RESET)(Initialize All)(Yes).
• Do not skip the above step!
Technical Information
Calculation Range and Precision
Calculation Range
±1 × 10
-99
to ±9.999999999 × 10
99
or 0
Number of Digits for
Internal Calculation
15 digits
Precision
In general, ±1 at the 10th digit for a single
calculation. Precision for exponential display is
±1 at the least significant digit. Errors are
cumulative in the case of consecutive
calculations.
Function Calculation Input Ranges and Precision
Functions Input Range
sin[
cos[
Degree
0 ԛ |[| < 9 × 10
9
Radian
0 ԛ |[| < 157079632.7
Gradian
0 ԛ |[| < 1 × 10
10
tan[
Degree
Same as sin[, except when |[| = (2Q−1) × 90.
Radian
Same as sin[, except when |[| = (2Q−1) ×
ʌ/2.
Gradian
Same as sin[, except when |[| = (2Q−1) ×
100.
sin
-1
[, cos
-1
[ 0 ԛ |[| ԛ 1
tan
-1
[ 0 ԛ |[| ԛ 9.999999999 × 10
99
26
スクリプト.indd26 2017/06/1217:18:30
To Next Page
Loading...
Need help?
General
