(Spreadsheet) Spreadsheet calculations
(Equation) Equation calculations
Specify the calculation mode that is suitable for the type of calculation you
want to perform.
1. Press to display the Main Menu.
2. Use the cursor keys to move the
highlighting to the icon you want.
3. Press to display the initial screen of the mode whose icon you
selected.
Note: The initial default calculation mode is the Calculate Mode.
Input and Output Formats
Before starting a calculation on the calculator, you should first use the
operation below to specify the formats that should be applied for calculation
formula input and calculation result output.
1. Press (SETUP)(Input/Output).
2. Press a number key ( to ).
(MathI/MathO)
Input: Natural Textbook; Output: Format that
includes a fraction*
1
(MathI/DecimalO)
Input: Natural Textbook; Output: Converted to
decimal value
(LineI/LineO)
Input: Linear*
2
; Output: Decimal or fraction
(LineI/DecimalO)
Input: Linear*
2
; Output: Converted to decimal
value
*1 Decimal output is applied when this format cannot be output for some
reason.
*2 All calculations, including fractions and functions are input in a single
line. Same output format as that for models without Natural Textbook
Display.
Input/Output Format Display Examples
MathI/
MathO
MathI/
DecimalO
LineI/LineO
LineI/
DecimalO
Note: The initial default input/output format setting is MathI/MathO.
5
スクリプト.indd5 2017/06/1217:18:28
To Next Page
Loading...
Need help?
General
