212
4. Recall the dynamic coefficient range setting menu.
2(RANG)
• The range you set remains in effect until you change it.
5. Change the range settings.
cw
J
• If you want to change the Dynamic Graph speed, press 3 (SPEED).
3(SPEED)
You can set the Dynamic Graph speed to any one of the following settings.
Stop & Go: Each step of the Dynamic Graph draw operation is performed each
time you press w.
Slow: 1/2 Normal
Normal: Default speed
Fast: Double Normal
1. Use f and c to move the highlighting to the speed you want to use.
2. Press 1 (SEL) to set the highlighted speed.
1
23456
13 - 3 Drawing a Dynamic Graph
Dynamic coefficient
Start value
End value
Increment
P.216
To Next Page
Loading...
