Casio Keyboard CDP-200R

English
Recording Your Keyboard Play
E-49
This section explains how to play along and record along with
one of the keyboard’s built-in songs.
● The following operations and settings also are
recorded along with your keyboard play.
Tone number, song number, pedal operation, tempo, reverb,
chorus, layer/split settings, pitch bend wheel operation
• There can be only one recording of keyboard play with a
built-in song in recorder memory. Making a new recording
replaces (deletes) previously recorded data.
1. Press
br
.
2. Press
8
.
This will enter playback standby.
3. Press
8
again.
This will enter record standby.
4. Use
cl
(10-key) to enter the song number you
want to assign to the recording.
5. Press
bp
to cycle through the parts in the
sequence shown below.
Example: Left-hand part recording
• Configure tone and tempo settings at this time as well.
6. Press
bo
to start built-in song playback and
recorder recording.
Play along with the playback.
• To stop recording part way through, press
bo
.
7. Recording will stop automatically when the end
of the built-in song is reached.
This will enter playback standby.
8. Press
bo
.
This will start playback of what you recorded.
• Each press of
bo
starts and stops playback.
9. Press
8
twice to exit the recorder mode.
■ To delete recorded data
After step 2 of the above procedure, do hold down
8
until the
message “Song Del?” appears on the display. Press [+] (YES)
to delete the song.
Recording while Playing Along
with a Built-in Song
Lights
Flashes
Flashes
Right-hand Recording
Both-hand Recording
Left-hand Recording
Flashes
Lights
Disappears
C