— 3 —
4. RESET OPERATION
Resetting initialize the memory
You should reset the memory of the label printer before using it for the first time, after you have not
used it for a long time, or if nothing happens when you turn power on.
Important!
Resetting label printer memory clears its memory of all input data.
To reset the memory
1. Make sure that label printer power is off.
2. While holding down the PRINT and ESC key, press ON to turn power on.
3. Press SET to initialize the label printer or ESC to abort the operation without initializing anything.
• The following are the initial setting of the label printer whenever you turn it power on or reset the
unit.
Item Power on Reset
Display Cleared Cleared
Memory Retained Cleared
User Characters Retained Cleared
Calendar Week Start Day
Sunday Sunday
Black Alignment Left Left
Font Retained Sans-Serif
Insert/Overwriter Insert Insert
Contrast (32 levels) Retained Level 15
Density (5 levels) Retained Level 3
Sound On On
Language Retained English
cm/inch Retained cm
Item Power on Reset
Horz/Vert Horizontal Horizontal
Text Alignment Left Left
Justification Justified Justified
Character Spacing Narrow Narrow
Block Length Auto Auto
Mirror Printing Normal Normal
Proportional Spacing On On
Smoothing On On
Block Spacing Narrow Narrow
Auto Feed Long Long
Tape Length Auto Auto
To Next Page
Loading...
Need help?
General
