Need help?Do you have a question about the Casio KL-1500 and is the answer not in the manual?
General| Model | KL-1500 |
|---|---|
| Type | Label Maker |
| Print Method | Thermal Transfer |
| Display | LCD |
| Keyboard | QWERTY |
| Label Width | Up to 18 mm |
| Tape Widths | 3.5 mm, 6 mm, 9 mm, 12 mm, 18 mm |
| Power Supply | AC Adapter |
| Power Source | AC or Battery |
| Weight | 0.5 kg |
Procedure to adjust the low battery detection threshold voltage using a multimeter.
How to set the thermal head rank using pads RNK1 and RNK2 on the PCB.
Procedure for checking the RAM functionality, displaying '64KOK' or '1MOK'.
Procedure for checking the LCD display, including frame, all dots, checker, and reversed checker.
Procedure for checking individual keys by pressing them according to LCD prompts.
Procedure to check the thermal head rank (A-D) using the switch settings.
Procedure for print test 1, displaying 'NOW PRINTING'.
Procedure for print test 2, displaying 'NOW PRINTING'.
Procedure for checking the VP voltage, which applies power to the thermal head.
Automated check of all diagnostic items (RAM, LCD, KEY, SW, PR1).
Indicates no data is stored in memory; suggests storing data before operation.
Indicates insufficient memory; suggests reducing data size or deleting old data.
Indicates the printer is currently performing a printing operation.
Indicates printing paused for tape cut; press SET to resume.
Indicates the chosen name for data storage is already in use.
Indicates text is too long for the tape; suggests shortening the text.
Indicates text has too many lines to fit into a frame; suggests reducing lines.
Unit asks for the starting point of an operation; use cursor keys and SET.
Previous text cannot be combined with new input; perform operation or input new text.
Current operation cannot be performed with 6 mm tape; change tape size.
Operation will clear previously input text; confirm or abort.
Memory data corrupted; reset unit, note data loss.
Memory initialization is required; select to initialize.
Unit requests text input; enter desired text.
Indicates low battery power; replace batteries or use AC adapter.
Memory is full; delete old data to make room for new data.
List of parts for the Z556-1 PCB assembly.
List of parts for the Z556-E4 PCB assembly.
List of component parts, including screws, tape, and rubber feet.
List of parts for the Chassis assembly, including head arm, cutter parts, and gears.
To Next Page
