E-40
Using a Memory Card
Reading a Memory Card
1
Press the CARD button.
2
Use the number buttons to input the three-digit
number that corresponds to the SMF data you want
to select.
3
Perform one of the following operations.
■ To play back SMF data
3
-1 Press the START/STOP button.
• The keyboard will read the SMF data and play it.
■ To use SMF data in a 3-Step Lesson
3
-1 Press the STEP 1, STEP 2, or STEP 3 button.
• The keyboard will read the SMF data and start a
lesson at the step you selected.
• An error message will appear if the selected SMF
data file is larger than about 320 KB.
• If an error message appears, see “Memory Card
Error Messages” on the following page for
information about what you need to do.
• The channel specified as the navigate channel is
assigned to the right-hand part, while the channel
that is one less than the channel specified as the
navigate channel is assigned to the left-hand part.
• Voice Fingering Guide and on-screen fingering
indicators, are not supported for SMF data.
663A-E-042A
■ To evaluate your play using SMF Data
3
-1 Press the SCORING button.
• The keyboard will read the SMF data and enter the
Evaluation Mode.
• An error message will appear if the selected SMF
data file is larger than about 320 KB.
• If an error message appears, see “Memory Card
Error Messages” on the following page for
information about what you need to do.
• The channel specified as the navigate channel is
assigned to the right-hand part, while the channel
that is one less than the channel specified as the
navigate channel is assigned to the left-hand part.
• On-screen fingering indicators are not supported
for SMF data.
4
Press the START/STOP button to stop SMF data play.
Indicator appears
To Next Page
Loading...
Need help?
General
