Casio Piano Sound CPS-50 - Tone Selection and Auto Power Off; Selecting Preset Tones; Touch Response Control

Auto power off function
Power
is
automatically
cut
off
approximately
6
minutes
after
the
last
operation
of
the
unit.
Power
supply
can
be
restored
by
switching
power
OFF
and
then
ON
again.
The
Auto
power
off
function
is
inoperative
when
playing
back
the
demonstration
tunes
(power
is
not
Ee
off,
even
though
you
don’t
touch
the
keyboard).
To caneel the Auto power off Faction | |
To
cancel
the
Auto
Power
Off
function,
turn
the
power
switch
ON
while
holding
down
the
E.PIANO
tone
selector.
The
unit
will
remain
ON
until
you
turn
OFF
manually.
Wu Tones : |
Selecting a tone
You can choose from 10 different tones. To select a tone, follow the steps below.
TONE
' PIANO 1 E.PIANO | papas
|) came 7 camp | enme
W.BASS/ STRINGS
PIANO 2 PIANO PIANO
rer >| ef a eee rh a “| =)
cou iui
VIBRA-
PHONE
PIPE
ORGAN
JAZZ
STRINGS Banal
TONE selectors
SELECT button
I. Set the POWER switch to ON. PIANO I tone is automatically selected when you
turn on this piano.
2. Specify either the upper or lower row of preset tones by pressing the SELECT
button. The upper or lower indicator lights to show the active row.
3. Press one of the TONE selectors to choose a preset tone.
About touch response
This piano features “Touch response” function which controls the volume of the
tones produced according to the keyboard pressure.
Using TOUCH CANCEL button
You can switch touch response function on and off using TOUCH CANCEL button.
When TOUCH CANCEL button is switched on (the indicator above this button
lights), tones are produced at a fixed volume regardless of the keyboard _ pressure.
TOUCH CANCEL
O
C™
Note
¢
TOUCH
CANCEL
button
is
OFF
when
the
power
of
the
piano
is
switched
ON.
11