Casio Piano Sound CPS-50 - About Memory Backup Power

Recording
two
different
parts
of
the
same
tune
in
SONG
A.
and
B
—
"2
_
|
|
Instead
of
recording
two
tunes
in
SONG
A
and
B
separately,
you
can
record
two
different
“parts”
of
the
same
tune
in
these
song
areas.
For
example,
you
can
record
the
left
hand
part
of
a
tune
in
SONG
A
area,
and
the
right
hand
part
in
SONG
B
area.
To
do
this,
follow
the
steps
below.
—
START
button
RECORD
button
STOP
button |
Song Select
button
¢
Recording
the
left
hand
part
of
a
tune
in
SONG
A
area’
|
1.
Switch
the
CPS-50
power
OFF.
|
oo
2.
While
holding
down
the
HARPSICHORD
tone
selector,
set
the
POWER
switch
to
back
ON.
a
3.
Press
the
RECORD
button
and
the
MEMORY
indicator
flashes
to
indicate
that
the
piano
is
in
record
standby.
.
ee
IMPORTANT
1
OS
=
-
The
next
step
erases
the
tune
in
the
SONG
A
area.
Make
sure
that
you
no
longer
need
the
tune
in
the
SONG
A
area
before
continuing.
Ifyou
need,
you
can
abort
the
recording
standby
by
pressing
the
RECORD
button
again,
without
erasing
the
tune.
4.
Start
playing
the
left
hand
part
of
a
tune
and
recording
starts
automatically.
|
5.
To
stop
recording,
press
the
STOP
button.
a
ee
¢
Recording
the
right
hand
part
of
a
tune
in
SONG
B
area
|
6.
Press
the
Song
select
button
twice
so
that
both
of
the
SONG
indicators
light.
In
this
status,
you
can
record
to
SONG
B
area
while
listening
to
the
playback
of
SONG
A
area.
|
|
7.
Press
the
RECORD
button
and
the
MEMORY
indicator
flashes
to
indicate
that
the
piano
is
in
record
standby.
tS
16
Scania neh oa meee msaioe nsimrimiredem's i pbainacincsmiarenah Saimin? tai parmograhN- me bie mes
IMPORTANT 7
The next step erases the tune in the SONG B area. Make sure that you no longer
need the tune in the SONG B area before continuing. If you need, you can abort
the recording standby by pressing the RECORD button again, without erasing the
tune. | : |
8. Start playing the right hand part of a tune and recording starts automatically.
9. To stop recording, press the STOP button. ,
¢ Playing back both parts together
10.Check your performance. If you want to listen to the recorded music (SONG A
and SONG B together), press the START button. The both parts start to play
together. |
Note
* You cannot record to SONG A area while listening to the playback of SONG B
area.
Playing back two different parts in SONG A and B at the
same time _
After you recorded two different parts of a tune in SONG A and SONG B, you can
play them back at the same time by the following procedure. |
1. While holding down the HARPSICHORD tone selector, set the POWER switch
to ON. oe 7
2. Press the Song select button twice so that both of the SONG indicators light.
3. Press the START button. The MEMORY indicator lights and playback of the
both song areas start at the same time.
4. To stop playback, press the STOP button.
About memory back-up power
The Performance Memory is electronic memory, which means that it retains its
contents even when you switch power OFF, as long as power is supplied through the
AC adaptor or by batteries. This means that Performance Memory contents will be
lost when there are no batteries loaded (or when the batteries go dead) and the AC
adaptor is not plugged in (or power through the AC adaptor is interrupted for any
reason). Note the following advice to keep your Performance Memory data safe.
¢ Make sure that the batteries loaded in the keyboard never go dead.
¢ When replacing batteries, be sure to connect the AC adaptor to supply power first.
{7