Recording and Playback
EN-63
English
1.
On the MENU screen, touch “MIDI
RECORDER”.
2.
Touch “Monitor”.
3.
Touch “Edit”.
4.
Touch “Copy”.
5.
In the “Source” list, touch the track you want
to copy.
6.
In the “Destination” list, touch the destination
track.
7.
Touch “Execute”.
8.
Touch “Yes”.
• To cancel the copy operation, touch “No”.
1.
On the MENU screen, touch “MIDI
RECORDER”.
2.
Touch “Monitor”.
3.
Touch “Edit”.
4.
Touch “Clear”.
5.
Touch the track you want to clear.
6.
Touch “Execute”.
7.
Touch “Yes”.
• To cancel the delete operation, touch “No”.
1.
On the MENU screen, touch “MIDI
RECORDER”.
2.
Touch “Monitor”.
3.
Touch “Edit”.
4.
Touch “Insert Measure”.
5.
Touch the track into which you want to insert
a blank measure.
6.
Touch the item whose setting you want to
change, and then use the bt w, q buttons
to change it.
Measure: Specifies the measure number from which
insertion starts.
Size: Specifies the number of measures to be inserted.
7.
After you are finished configuring settings,
touch “Execute”.
8.
Touch “Yes”.
• To cancel the insert operation, touch “No”.
• If a Point A and Point B are specified using the
procedure under “To repeat playback of a specific
section (Repeat)” (page EN-61) before performing
this operation “Measure” and “Size” settings will be
configured automatically.
To copy one track to another
To clear a track
To insert a blank measure at a specific
position in a specific track
PX560-ES-1A.indd 65 2015/06/18 14:53:52
To Next Page
Loading...
Need help?
General
