EN-15
Digital Piano Operations
Use the tuning feature when you need to adjust the pitch
slightly to play along with another musical instrument.
• The tuning feature specifies the frequency of the A4 note.
You can set a frequency within the range of 415.5 to
465.9 Hz. The initial default setting is 440.0 Hz.
• You can change the frequency in 0.1 Hz steps.
■ To change the tuning setting
1.
Hold down 3 FUNCTION.
• Do not release 3 FUNCTION until step 3, below.
2.
Use the keyboards keys below to adjust tuning.
* A reference tone (page EN-10) sounds whenever the
setting values becomes an integer (whole number), such as
440, 441, etc.
3.
After selecting the tuning you want, release
3 FUNCTION.
• The adjusted tuning setting is retained even if you turn
off power.
Octave shift lets you individually raise or lower the pitches of
the Upper1 part and Upper2 part in octave units.
■ To change the Upper1 part pitch in octave units
1.
While holding down 8 GRAND PIANO, press
the D3 or E}3 keyboard key.
• You can shift the octave within the range of –2 to +2.
2.
After the setting is the way you want, release
8 GRAND PIANO.
■ To change the Upper2 part pitch in octave units
1.
While holding down 8 GRAND PIANO, press
the E}4 or E4 keyboard key.
• You can shift the octave within the range of –2 to +2.
2.
After the setting is the way you want, release
8 GRAND PIANO.
Fine Tuning a Pitch (Tuning)
Pressing this key: Does this:
G4 Lowers the A4 frequency 0.1 Hz.*
A}4 Raises the A4 frequency 0.1 Hz.*
A4 Sets the A4 frequency to 440.0 Hz.
B}4 Sets the A4 frequency to 442.0 Hz.
Changing the Pitch in Octave
Units (Octave Shift)
Pressing this key: Does this:
D3 Lowers the pitch of the Upper1 part
one octave.
E}3 Raises the pitch of the Upper1 part
one octave.
D3 + E}3 Returns the pitch of the Upper1 part
to the initial default setting.
Pressing this key: Does this:
E}4 Lowers the pitch of the Upper2 part
one octave.
E4 Raises the pitch of the Upper2 part
one octave.
E}4 + E4 Returns the pitch of the Upper2 part
to the initial default setting.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
