Casio PX-110 User Manual

46
DSP Type parameter
The value of this block's parameter is rewritten whenever the DSP Type or Tone is changed.
Note 1:
These parameters change the DSP name. One character is indicated by each byte.
Note 2:
This value is the DSP algorithm ID, which cannot be changed directly at the user level. Changing the DSP Type
or Tone Number causes the algorithm ID of the original DSP to be copied automatically to this area. See "25.16
DSP Algorithm ID Table".
DSP Type Independent Parameters
The eight DSP user parameters listed below can be set by the control change messages, while the following16
internal parameters that can be set by system exclusive messages only. The range of these parameter values is 0 to
127, regardless of the DSP algorithm. However, the number of parameter types depends on the DSP algorithm,
which means that not all User Parameters and Internal Parameters are necessarily available as a particular DSP's
parameters.
See the "Part VII DSP Parameter List" for details about parameter types and contents.
ParamID Parameter bit Value Default Setting Value (Decimal)
30 DSP Name A (Note1) 20
0～FFFFFFFF
556e7469 MSB is leading character.
31 DSP Name B (Note1) 20
0～FFFFFFFF
746c6564 MSB is leading character.
32r DSP Algorithm ID (Note2) 07
00～3F
00
0～63
33 DSP Chorus Send 07
00～7F
40
0～127
34 DSP Reverb Send 07
00～7F
40
0～127
ParamID Parameter bit Value Default Setting Value (Decimal)
38 DSP User Parameter0 07 00-7F - 0-127
39 DSP User Parameter1 07 00-7F - 0-127
3A DSP User Parameter2 07 00-7F - 0-127
3B DSP User Parameter3 07 00-7F - 0-127
3C DSP User Parameter4 07 00-7F - 0-127
3D DSP User Parameter5 07 00-7F - 0-127
3E DSP User Parameter6 07 00-7F - 0-127
3F DSP User Parameter7 07 00-7F - 0-127
40 DSP Internal Param00 07 00-7F - 0-127
41 DSP Internal Param01 07 00-7F - 0-127
42 DSP Internal Param02 07 00-7F - 0-127
43 DSP Internal Param03 07 00-7F - 0-127
44 DSP Internal Param04 07 00-7F - 0-127
45 DSP Internal Param05 07 00-7F - 0-127
46 DSP Internal Param06 07 00-7F - 0-127
47 DSP Internal Param07 07 00-7F - 0-127
48 DSP Internal Param08 07 00-7F - 0-127
49 DSP Internal Param09 07 00-7F - 0-127
4A DSP Internal Param10 07 00-7F - 0-127
4B DSP Internal Param11 07 00-7F - 0-127
4C DSP Internal Param12 07 00-7F - 0-127
4D DSP Internal Param13 07 00-7F - 0-127
4E DSP Internal Param14 07 00-7F - 0-127
4F DSP Internal Param15 07 00-7F - 0-127

Casio PX-110 Specifications

General

Polyphony	32 notes
Speakers	2 x 12cm
Amplifier Output	8W + 8W
Digital Effects	Reverb, Chorus
Touch Sensitivity	3 levels, Off
Metronome	Yes
Transpose	Yes
Tuning	Yes
Pedals	1 (Sustain)
Connectors	Headphone, Pedal
Power Supply	AC adapter (AD-12)
Included Accessories	AC adapter
Keyboard Type	88-key weighted hammer action