Casio PX-110 - Patch Part Parameter List

47
19.2 Patch Part Parameter List
This list shows setting parameters that are specific for each part.
System Exclusive Format
Basic Parameter List
Note 1:
Number of the tone allocated to this part.
Note 2:
Sets the melody and rhythm modes of the part play operation. For detailed operations, see "10.1 About the Part
Mode".
Tune / Mix parameter
Field Value
01 SYSEX F0
02 MAN 44
03 MOD 11,02
04 dev 00 to 1F, or 7F
05 act 00(IPC), 01(IPR)
06 cat Patch = 01
07 prm 00-7F
08 ilen/dlen 0 / bit size - 1
09 ps LSB,MSB = 00, 00
10 index Part Number - 1 (00-1F)
11 data See the Parameter List.
12 sum None
13 EOX F7
ParamID Parameter bit Value Default Setting Value (Decimal)
50 Tone Number (Note1) 0E 000
000～FFF
51 Part Octave Shit 03
2～6
4
-2～0～2 Oct
52 Part Enable 01
0～1
1 0...Disable (Off)
1...Enable (On)
53 Part Mode (Note2) 04
0～4
0 0...Normal
1...Rhythm
2...Reserved
3...Reserved
4...Reserved
5...Piano
ParamID Parameter bit Value Default Setting Value (Decimal)
54 Pitch Fine Tune 08
00～FF
80
-99～0～99cent
55 Pitch Coarse Tune 07
28～58
40
-24～0～24 semi
56 Volume 07
00～7F
7F
0～127
57 Accomp Volume
(PX-110/PX-310)
07
00～7F
7F
0～127
58 Bend Range 07
00～18
02
0～+24
59 Pan 07
00～7F
40
-64～0～63