– 48 –
Pedal check
1. Press the "BASS/GUITAR" button to select the "Pedal check".
* The procedures following this step differ according to the type of the
pedal unit.
<Pedal Check for SP-3>
1. Connect the SP-3 pedal unit to the "SOFT/SOSTENUTO" jack and step
on a pedal.
TheconrmationchordG4sounds.
2. Connect the SP-3 pedal unit to the "DAMPER" jack and step on a pedal.
TheconrmationchordC4sounds.
<Pedal Check for SP-32>
1. Press the "SOFT" pedal.
TheconrmationchordE4sounds.
2. Press the "SOSTENUTO" pedal.
TheconrmationchordG4sounds.
3. Press the "DAMPER" pedal (ON HALF).
TheconrmationchordC4sounds.
4. Pressthe"DAMPER"pedalrmly(ONFULL).
TheconrmationchordC4sounds.
Sf00 St00 Dp00
BenderOK
Note00 Vel00
Sf7F St00 Dp00
BenderOK
Note00 Vel00
Sf00 St00 Dp7F
BenderOK
Note00 Vel00
Sf7F St00 Dp00
BenderOK
Note00 Vel00
Sf00 St7F Dp00
BenderOK
Note00 Vel00
Sf00 St00 Dp40
BenderOK
Note00 Vel00
Sf00 St00 Dp7F
BenderOK
Note00 Vel00