Parameter ID R/W Block Size Array Min-Def-Max Description
4...1/2
5...2/3
6...3/4
7...1
8...4/3
9...3/2
10...2
22.8 System Reverb Parameter
These parameters are for configuring system reverb settings.
Parameter ID R/W Block Size Array Min-Def-Max Description
Type 0080 R/W 55-0:0 7 01 00-02-03 0...Room
1...Hall1
2...Hall2
3...Plate
Time 0081 R/W ↑ 7 01 00-40-7F 0 - 127
Early Reflection 0082 R/W ↑ 7 01 00-40-7F 0 - 127
High Damp 0083 R/W ↑ 7 01 00-67-7F 0 - 127
Tone 0084 R/W ↑ 7 01 00-65-7F 0 - 127
22.9 System Resonance Parameter
These parameters are for configuring system resonance settings.
Parameter ID R/W Block Size Array Min-Def-Max Description
String Resonance Send 00C5 R/W 55-0:0 4 01 00-0F-0F 0 - 15
Damper Resonance Send 00C6 R/W ↑ 4 01 00-0F-0F 0 - 15
Damper Resonance Noise Enable 00C7 R/W ↑ 1 01 00-01-01 0...Off
1...On
22.10 Patch Etc Parameter
These parameters configure other patch settings.
Parameter ID R/W Block Size Array Min-Def-Max Description
Stage Setting Name[16] 00F2 R/W 55-0:0 7 10 00-20-7F Ascii Character
Tempo 010F R/W ↑ 8 01 14-78-FF 20 - 255
Phrase Seq Number 0110 R/W ↑ 32 01 00000000-00000000-000003E7 0 - 999
Hammer Response 0111 R/W ↑ 4 01 00-02-07 0 - 7
Zone Enable 0112 R/W 1-0:Zone # 1 01 00-01-01 0...Off
1...On
Zone Key Range Low 0113 R/W ↑ 7 01 00-00-7F 0 - 127
Zone Key Range Hi 0114 R/W ↑ 7 01 00-7F-7F 0 - 127
Zone Velocity Range Low 0115 R/W ↑ 7 01 00-00-7F 0 - 127
Zone Velocity Range Hi 0116 R/W ↑ 7 01 00-7F-7F 0 - 127
Zone Bend Range Low 0117 R/W ↑ 7 01 00-02-18 0 - 24
Zone Bend Range Hi 0118 R/W ↑ 7 01 00-02-18 0 - 24
Zone Octave Shift 0119 R/W ↑ 7 01 3E-40-42 -2 - 0 - +2
Zone Transpose 011A R/W ↑ 7 01 34-40-4C -12 - 0 - +12
Zone Knob1 Enable 011B R/W ↑ 1 01 00-01-01 0...Off
1...On
Zone Knob2 Enable 011C R/W ↑ 1 01 00-01-01 0...Off
1...On
Zone Knob3 Enable 011D R/W ↑ 1 01 00-01-01 0...Off
1...On
Zone Knob4 Enable 011E R/W ↑ 1 01 00-01-01 0...Off
1...On
Zone Slider1 Enable 011F R/W ↑ 1 01 00-01-01 0...Off
1...On
53
To Next Page
Loading...
