Casio PX-5S - Chorus; Flanger; Tremolo

Note1: For information about the relationship between setting values and send/receive values, see “33.4 –64 - 0 - +63 Setting
Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Note2: For information about the relationship between setting values and send/receive values, see “33.11 LFO Wave Form1
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
32.7 Chorus
Parameter Number Parameter Name Notes
Parameter[1] LFO Rate
Parameter[2] LFO Depth
Parameter[3] LFO Waveform Note1
Parameter[4] Feedback Note2
Parameter[5] Wet Level
Parameter[6] Polarity Note3
Parameter[7] Input Level
Parameter[8] Dry Level
Note1: For information about the relationship between setting values and send/receive values, see “33.12 LFO Wave Form2
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Note2: For information about the relationship between setting values and send/receive values, see “33.4 –64 - 0 - +63 Setting
Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Note3: For information about the relationship between setting values and send/receive values, see “33.14 Polarity Setting
Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
32.8 Flanger
Parameter Number Parameter Name Notes
Parameter[1] LFO Rate
Parameter[2] LFO Depth
Parameter[3] LFO Waveform Note1
Parameter[4] Feedback Note2
Parameter[5] Wet Level
Parameter[6] Input Level
Parameter[7] Dry Level
Note1: For information about the relationship between setting values and send/receive values, see “33.11 LFO Wave Form1
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Note2: For information about the relationship between setting values and send/receive values, see “33.4 –64 - 0 - +63 Setting
Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
32.9 Tremolo
Parameter Number Parameter Name Notes
Parameter[1] LFO Rate
Parameter[2] LFO Depth
Parameter[3] LFO Waveform Note1
Parameter[4] Wet Level
Parameter[5] Dry Level
Note1: For information about the relationship between setting values and send/receive values, see “33.13 LFO Wave Form3
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
66