Casio PX-S1100RD - Vibrato Rate (4 CH); Vibrato Depth (4 DH); Vibrato Delay (4 EH)

Transmit Sent when the knob is operated by setting. (PX-S3100)
Sent when MIDI setting of Accomp Out set to ON and when automatic accompaniment is used.
(PX-S3100)
Receive Receipt changes the filter cutoff frequency.
7.16 Vibrato Rate (4CH)
Message Format: BnH 4CH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “13.3 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when the knob is operated by setting. (PX-S3100)
Receive Receipt changes the note vibrato rate.
7.17 Vibrato Depth (4DH)
Message Format: BnH 4DH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “13.3 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when the knob is operated by setting. (PX-S3100)
Receive Receipt changes the depth of pitch modulation.
7.18 Vibrato Delay (4EH)
Message Format: BnH 4EH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “13.3 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when the knob is operated by setting. (PX-S3100)
Receive Receipt changes the time it takes until note vibrato starts.
12