— 31 —
6-5. REMOTE DISPLAY
6-6. HANDY SCNNER
6-7. REMOTE PRINTER / SLIP PRINTER
Note: The REMOTE DISPLAY and the REAR DISPLAY cannot be fixed at the same time.
1. Remove two screws and the lower case.
2. Connect the following peripherals to the COM ports respectively.
REMOTE DISPLAY : COM3
HANDY SCANNER : COM2
REMOTE PRINTER/ : COM4, 5, 6
SLIP PRINTER
3. Remove the parts from which the peripherals should be connected with a nipper.
4. Fix the lower case with two screws.
Screws
Remove the parts from which the peripherals
should be connected with a nipper.
Screws
To Next Page
Loading...
