— 87 —
Prompt message Meaning Action
E150 Incorrect value entry. Incorrect entry for PGM Enter proper value again.
E151 Incorrect Key Pressed. Linking is incorrect. Enter proper key again.
E152 PGM File or Memory
number does not Exist.
No such file, no such record Enter file/record number again.
E164 Employee No. is not
Found in the Employee
File.
Employee No. is not set in the Employee
File.
Enter employee number again.
E165 Employee No. is not
Clocking-in.
Employee has not done CLOCK-IN
operation yet.
Perform CLOCK-IN operation.
E166 Employee No. is
Occupied.
Employee who has done CLOCK-IN
operation attempts to operate CLOCK-IN
again.
Enter the proper employee number again.
E167 Incorrect Job code. Employee attempts to operate CLOCK-IN
with incorrect JOB code.
Enter proper job code.
E168 Your Operation is out of
Schedule. Please Call
Manager.
Employees operate CLOCK-IN/OUT in not
allowance time.
Follow the prompt message.
E169 Work Hours Exceeded.
Please Call Manager.
Overtime work. Follow the prompt message.
E170 No Shift Remains in the
Schedule. You cannot
Clock-in.
There is no available shift left.
E171 Please Break-out and
Retry.
Employee attempts to operate CLOCK-
OUT whilst he/she is in a break time.
Follow the prompt message.
E172 Break Hours Exceeded.
Please Call Manager.
Break hours are exceeded. Follow the prompt message.
E173 This employee is at work
now.
Employee is at work without break.
E174 This employee is taking a
break now.
Employee who has not done BREAK-OUT
operation attempts to operate BREAK-IN.
E175 Please Clock-in/Break-
out before you sign on. or
Please Call Manager.
Sign on after you clock-in or break out. Follow the prompt message.
E176 You cannot Clock-in.
Please reset Employee
Report.
Employee Report has not been reset. Follow the prompt message.
E177 Time&Attendance Data
Communication Error.
Please Call Manager.
Time & Attendance Data communication
error.
Follow the prompt message.
E180 IDC FILE (1) memory full.
Please clear IDC data.
IDC FILE (1) memory is full of items. Follow the prompt message.
E181 IDC FILE (2) memory full.
Please clear IDC data.
IDC FILE (2) memory is full of items. Follow the prompt message.
E182 IDC FILE (3) memory full.
Please clear IDC data.
IDC FILE (3) memory is full of items. Follow the prompt message.
E184 OPEN CHK/TBL data
exist.
Open check/ table data exist while
resetting fixed total.
Close the opend check/ table data first.
E185 Item is not active. Registrer non active item. Register active item.
E200 Insert CF Card. CF card is not inserted to the slot. Insert CF card.
E201 Format error. CF card data or formats illegal. Check the CF card.
E203 Insufficient memory. Insufficient memory is remained in CF
card.
Format or use a new CF card.
E205 The file already exists. Do
you replace?
YES : Replace the file.
NO : Input new name.
File name duplication error Follow the prompt message.
E210 Mag Card Reader Error. Magnetic card read error. Swipe the card again.
E211 Wrong Card Prefix Code. Card prefix code error This card cannot be used.
To Next Page
Loading...
Need help?
General
