Casio QT-6600

— 5 —
Copyright(C) 2008
CASIO COMPUTER CO.,LTD.
All rights reserved.
ROM VER. xxxxxx xxxx
CREATE xxxx-xx-xx xx:xx
QT-6600 x.xx
APL VER. xxxxxx xxxx
Version
INIT
C
7 8 9
4 5 6
1 2 3
0
OK
2. MACHINE INITIALIZATION
2-1. How to initialize the terminal
Preparation:
1. All peripheral devices and terminals of this cluster should be turned off.
2. Connect all of the peripheral devices (such as printer, display etc.) to terminal.
3. Connect all terminals by inline.
Operation:
4. Turn on all peripheral devices of a terminal.
5. Turn on this terminal with pressing the initialize switch and release after beep sound.
6. After releasing the key, enter “20000” (U.S.), “10000” (other area: English), “40000” (other area:
German), “50000” (other area: French), “60000” (other area: Spanish) and press the <OK> key.
Enter terminal ID and IP address
Init Sw
ID & I P A DDR ESS
Terminal I D
ENTER ID
IP ADDRESS
AUTO
FTP Server
OK?
———
Terminal ID: 0,1 ~ 32
———
Press <YES> to continue.
Yes
Yes