Casio QT-6600 Service Manual

— 6 —
• Case 1: If your system has no LAN device = “0”
OK?
———
Press <YES> to continue.
Yes
• Case 2: Terminal ID = “1”
——— Press <YES> to continue.
———
Select <YES>, if you want to use this terminal as an FTP server.
——— Select “CLIENT”, if you want to use this terminal as a DHCP client.
——— Enter IP address if you want to change.
IP ADDR ESS
FTP Ser ver
DHC P SER VER
192 . 16 8. 0.
1
MAN UAL
OK?
Yes
Yes
* The IP address of each terminal should be the unique number from 192.168. 0. 1 to
192.168.255.255.
• Case 3: Terminal ID = “2” ~ “32”
——— Press <YES> to continue.
———
Select “MANUAL”, if you want to enter IP address manually.
(IP address setting line will appear on the screen.)
IP ADDR ESS AUT O
OK? Yes
Declare terminal configuration
——— Enter cluster No. “1” ~ “ 9”, if using check cluster system.
——— Select the appropriate printer.
——— Select the appropriate printer.
——— Press <YES> to continue.
———
Master / Backup master / Satellite / Self master
——— Enter time if it is wrong.
——— Within 12 characters
——— Enter date if it is wrong.
OK?
Sli p P rint er
No
R/J /Ord er Prin ter3
No
R/J /Ord er Prin ter2
No
R/J /Ord er Prin ter1
No
Che ck Clus ter ID
0
Che ck Syst em
Mas ter
ID Cha ract er
MC #01
Tim e
12: 34 0 0
Dat e
01- 10-1 0
YES

Casio QT-6600 Specifications

General

Brand	Casio
Model	QT-6600
Category	Touch terminals
Language	English