E-98
CONNECTIONS
• When connecting a plug to the DIGITAL ter-
minal, make sure the cord is facing in the di-
rection of the VIDEO OUT terminal as
shown in the illustration. Otherwise, you will
not be able to fully insert the plug into the
terminal.
CONNECTIONS
IMPORTANT!
• Be sure to turn off both the camera and other equip-
ment before making any connections.
• Check the documentation that comes with your other
equipment for information you may need to know
when making connections.
• Leaving the same image displayed on a television or
computer display screen for very long periods can
cause the image to be “burned in” on the screen. When
this happens, a faint after-image remains on the
screen, even after you disconnect the camera. To avoid
this, you should not leave the same image displayed on
such a screen for very long periods.
• This camera does not support cable transfer of data
with other CASIO digital cameras.
This camera is equipped with a VIDEO OUT terminal for
connection to a television or video deck, and a DIGITAL ter-
minal and USB port for connection to a computer or other
equipment.
Computer
E-100
Television
E-99
1 Special USB cable
When connecting to a computer, use the special USB cable
and USB driver software that comes with the camera.
2 Special video cable that comes with camera
3 Cables
DIGITAL
Terminal
VIDEO OUT
Terminal
USB Port
VIDEO OUT DIGITAL
Plug
To Next Page
Loading...
