OTHER SETTINGS
128
Formatting Built-in Memory
Formatting built-in memory deletes any data stored in it.
IMPORTANT!
• Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
• Formatting built-in memory deletes all files, including
files in the FAVORITE folder (page 112), protected
files (page 105), Best Shot user setups (page 75),
the startup image (page 118), and the power down
image (page 119).
1.
Check to make sure there is no memory card
loaded in the camera.
• If there is a memory card loaded in the camera,
remove it (page 130).
2.
In the REC mode or the PLAY mode, press
[MENU].
3.
Select the “Set Up” tab, select “Format”, and
then press [].
4.
Select “Format”, and then press [SET].
• To exit the format operation without formatting,
select “Cancel”.
To Next Page
Loading...
Need help?
General
