VIEWING IMAGES ON A COMPUTER
136
1.
What you should do first depends on whether
your computer is running under Windows 98/
Me/2000 or Windows XP.
■ Windows 98/Me/2000 Users
• Start from step 2 to install the USB driver.
• Note that the example installation presented here
uses Windows 98.
■ Windows XP Users
• Installation of the USB driver is not required, so jump
directly to step 6.
2.
Set the bundled CD-ROM into the CD-ROM
drive of your computer.
3.
On the menu screen that appears, click the
language button in the upper left corner of the
display, and then select a language from the
list that appears.
IMPORTANT!
• You need the optional AC adaptor (AD-C30) in order
to connect the camera to a computer using the USB
cable. If you do not use the AC adaptor to power the
camera, it will be powered only by its batteries, which
creates the risk of sudden power failure during file
transfer should batteries go low. Such power failure
can cause corruption of camera memory and/or your
memory card.
• Do not try to establish a connection between the
camera and computer before installing the USB
driver onto the computer.
• If you want to transfer files from the camera’s built-in
memory to a computer, make sure there is no
memory card loaded in the camera before you
connect the USB cable.
To Next Page
Loading...
Need help?
General
