VIEWING IMAGES ON A COMPUTER
141
IMPORTANT!
• You need the optional AC adaptor (AD-C30) in order
to connect the camera to a computer using the USB
cable. If you do not use the AC adaptor to power the
camera, it will be powered only by its batteries, which
creates the risk of sudden power failure during file
transfer should batteries go low. Such power failure
can cause corruption of camera memory and/or your
memory card.
• If you want to transfer files from the camera’s built-in
memory to a computer, make sure there is no
memory card loaded in the camera before you
connect the USB cable.
1.
Connect the optional AC adaptor to the [DC IN
3V] connector of the camera, and then plug it
in to a household power outlet.
Plug
Terminal cover
[DC IN 3V]
AC power cord
AC adaptor
To Next Page
Loading...
Need help?
General
